Highly Shielded House

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Highly Shielded House

Arctic Coast
I am currently researching shielding solutions for complete rooms,or even houses,
and found the following project:

http://www.eiwellspring.org/emc/HighlyShieldedHouse.htm

I do think that if one does not get it absolutely right,
one might end up making the emf-symptoms worse,
or simply exchange them in other symptoms,
like I have done myself in earlier shielding-projects.

Please post any experience with doing complete rooms or houses.
Reply | Threaded
Open this post in threaded view
|

Re: Highly Shielded House

Dmitry
one can also paint the room with yshield's HSF54/PRO54
Reply | Threaded
Open this post in threaded view
|

Re: Highly Shielded House

Arctic Coast
The last house I lived in was made out of wood
and situated only 150 meters from the nearest cellmast.
It was really right in the radiationblast and building a Faradaycage
proved very challenging,as the intensity was so overwhelming.

I used aluminium flyscreen,and was quite thorough when putting it together,
although a little less thorough regarding the grounding issue.

When I moved from that house I kept the pieces of mesh,
and in the next house I have now simply stapled them to the walls,roof and floor,
looking like a quilt.
Really sloppy and done in haste,leaving generous openings here and there
(not tightening the overlappings),etc..

But..Eh..this time it is working.

While inside of the Faradaycage in the previous house
I would still have full cellphonecoverage,
now in this sloppy room I am down to 1 bar on the phone display.

My current house (horrible expression,yes) is made of concrete
and is located in an area where the Acoustimeter rarely gives of a blink now and then.

This really shows how important the building material and radiant levels of the surroundings are.
And I think everybody must take this into consideration
when discussing what shielding-solutions works for them or not.

Shielding in a high radiant area is like..taking a submarine to the Marianas Trench
-the water is gonna be pushing immensely hard at all weak spots of the structure.
Likewise with MW`s vs your house when you are in the main blast from cellmasts.

And btw,those termal space blankets I tried was just a waste of money and time.

Yesterday I grounded my new room with 3x2,5mm copper wire
fastened to the copper waterpipes of the building.
This made a difference.

I have used alumesh to cover most windows,
and on a daily basis most emf symptoms are now gone.

Such as:
-24 hour blasting headache
-chest pressure/breathing problems
-absurd heart rates,somtimes racing at 105pbm (while resting),other times absent-like a silent river.
-pressure and spasms in eyeballs
-current going to genitalia
-brainfog,consentration problems
-and so on..

So things are looking better for me than they have in a very long time,
and only at night do I go into the shielded room.
Yesterday I did the grounding job,
and I was anticipating changes-for the better or worse
-something always changes when I modify the shielding.

The first thirty minutes after I went to bed
there was tingeling moving through my entire body,
moderate stinging pains in teeth,muscle spasms,humming in my head.
But at the same time a silence,a peace underneath all those symptoms,
so I waited it out.
And more than anything else it felt like the brain and nervous system
were adopting to new and very different working conditions.

Within an hour the symptoms had dissipated.

And a silent peace expanding warm and calm throughout the body.
No pain.No stress.
Like having the body sedated while at the same time experiencing hightened cognitive capabilities.

This morning I noticed electric patterns
where the overlapping of the mesh where quite generous.
This is electricity..okay..trapped between two layers of mesh..eh..but what does this mean?

Does it mean that in the blank spaces where I cant see these patterns
the radiation is instead being reflected off the mesh and back into the building,
while where the patterns are visible
the electricity is trapped and will be carried off through the grounding wires?

Any inputs?

I disconnected the mains el.fuses for the whole building
but the patterns stayed unchanged.

Here are some pics:


Reply | Threaded
Open this post in threaded view
|

Re: Highly Shielded House

Fog Top
I've had better results shielding with aluminum foil vs. aluminum screen.  The screen cuts down the RF quite a bit but just not enough for me to be comfortable for any length of time if in a high RF area.  It sounds like your cage is doing the trick though now that you're in a lower RF area.  It doesn't take much to make a cell phone call.  I'm in an area where an HF35C stays on 003 uw/m2 and a single bar goes in and out on a cell phone, but I still manage to send/receive text msgs - calls will usually drop within a couple minutes, but I'm unable to use a mobile for calls anyway. 

Perhaps the "electric wave" you're now seeing is coming from earth from the electric system in your area?  It will appear even when your power is cut off at the mains.  Really nothing you can do can stop that except to spend thousands on magnetic field blocking materials.  Also, did you check those copper water pipes for current (magnetic field) before you grounded to them?  Metal water pipes often carry an electric current into the house coming from where the pipes connect to earth outside the house.  Had that problem in my house and had to splice a piece of PVC pipe right where the pipes entered and exited (outside faucets) the house.

It's good to hear you're getting some relief from EMF! 


From: Arctic Coast [via ES] <ml+[hidden email]>
Sent: Friday, September 14, 2018 1:27 PM
To: Fog Top
Subject: [ES] Re: Highly Shielded House
 
The last house I lived in was made out of wood
and situated only 150 meters from the nearest cellmast.
It was really right in the radiationblast and building a Faradaycage
proved very challenging,as the intensity was so overwhelming.

I used aluminium flyscreen,and was quite thorough when putting it together,
although a little less thorough regarding the grounding issue.

When I moved from that house I kept the pieces of mesh,
and in the next house I have now simply stapled them to the walls,roof and floor,
looking like a quilt.
Really sloppy and done in haste,leaving generous openings here and there
(not tightening the overlappings),etc..

But..Eh..this time it is working.

While inside of the Faradaycage in the previous house
I would still have full cellphonecoverage,
now in this sloppy room I am down to 1 bar on the phone display.

My current house (horrible expression,yes) is made of concrete
and is located in an area where the Acoustimeter rarely gives of a blink now and then.

This really shows how important the building material and radiant levels of the surroundings are.
And I think everybody must take this into consideration
when discussing what shielding-solutions works for them or not.

Shielding in a high radiant area is like..taking a submarine to the Marianas Trench
-the water is gonna be pushing immensely hard at all weak spots of the structure.
Likewise with MW`s vs your house when you are in the main blast from cellmasts.

And btw,those termal space blankets I tried was just a waste of money and time.

Yesterday I grounded my new room with 3x2,5mm copper wire
fastened to the copper waterpipes of the building.
This made a difference.

I have used alumesh to cover most windows,
and on a daily basis most emf symptoms are now gone.

Such as:
-24 hour blasting headache
-chest pressure/breathing problems
-absurd heart rates,somtimes racing at 105pbm (while resting),other times absent-like a silent river.
-pressure and spasms in eyeballs
-current going to genitalia
-brainfog,consentration problems
-and so on..

So things are looking better for me than they have in a very long time,
and only at night do I go into the shielded room.
Yesterday I did the grounding job,
and I was anticipating changes-for the better or worse
-something always changes when I modify the shielding.

The first thirty minutes after I went to bed
there was tingeling moving through my entire body,
moderate stinging pains in teeth,muscle spasms,humming in my head.
But at the same time a silence,a peace underneath all those symptoms,
so I waited it out.
And more than anything else it felt like the brain and nervous system
were adopting to new and very different working conditions.

Within an hour the symptoms had dissipated.

And a silent peace expanding warm and calm throughout the body.
No pain.No stress.
Like having the body sedated while at the same time experiencing hightened cognitive capabilities.

This morning I noticed electric patterns
where the overlapping of the mesh where quite generous.
This is electricity..okay..trapped between two layers of mesh..eh..but what does this mean?

Does it mean that in the blank spaces where I cant see these patterns
the radiation is instead being reflected off the mesh and back into the building,
while where the patterns are visible
the electricity is trapped and will be carried off through the grounding wires?

Any inputs?

I disconnected the mains el.fuses for the whole building
but the patterns stayed unchanged.

Here are some pics:





If you reply to this email, your message will be added to the discussion below:
http://es-forum.com/Highly-Shielded-House-tp4032754p4032781.html
To start a new topic under ES, email ml+[hidden email]
To unsubscribe from ES, click here.
Reply | Threaded
Open this post in threaded view
|

Re: Highly Shielded House

Arctic Coast
Thanks

I removed the grounding wire for the last two nights,
without noticing any changes.
Have not yet tried to dig down a separate copper grounding rod
straight into the ground outside.

I have an order of tough alufoil on its way.
I am thinking that I must also have a Gauss meter if I am to get things right.

Maybe Gigahertz Solutions ME3851A,that goes down to 0,1nT or 0,1v/m.

Those patterns I mentioned might of course be anything,
but these EHS problems need extreme attention to detail if one is to get a grip of the health situation.
This old house is made of concrete,wich means that basically the whole house is grounded
-as it is made of earth/concrete.

The house is in need of renovation,and THIS would be the time to do things right,
regarding all kinds of shielding(inside or outside-or both?)
and also grounding/isolation/windows/roofing material/put in wired web/telephone on all floors..etc..

Or maybe no wires at all.
Maybe go 100% non-electrical,with woodfueled ovens for food,heat and hot water.
Lot of things to research before taking action.

Cheers
Reply | Threaded
Open this post in threaded view
|

Re: Highly Shielded House

sailplane
In reply to this post by Arctic Coast
Patterns look like reflection from the light... I'm not sure why you're identifying them as 'electric patterns' ..
did you push on the material/bend it slightly to see if the pattern will change?
Try use different lighting.. turn off all lights and use the flash of the camera for example..  The 'mesh' being made of little square produces this effect when the mesh it bent..
I'm using similar material...My guess is that overlapping is probably what's causing it.. simply because of how the squares are lining up and reflecting the light.. you probably don't see this where there is no overlap?.. In any case, moving things around should shift the pattern, confirming to you that it's just a visual illusion due to the overlapping and lighting....
Reply | Threaded
Open this post in threaded view
|

Re: Highly Shielded House

Arctic Coast
Well,the mesh is a barrier towards airborne electricity,
and it does not stop all of it-so I am thinking that som of the electricity that gets through
then ends up going back and forth between the two overlapping layers.

Yes,patterns change when I push the mesh with my fingers.
Could be light,but patterns stays the same regardless of natural window-light
or led flashlight?
Wether or not the patterns are there when no light is hitting them,
I cannot tell...
Well,mesh is now taken down and redistributed around the house windows.